Saratoga Springs, UT 84045 • Independent Furnace Repair Referral Network 24/7 Dispatch Line: (801) 803-1689
Furnace Repair Pros Saratoga Springs logo

Furnace Igniter & Flame Sensor Repair in Saratoga Springs

Direct Answer: If your furnace clicks, glows, or lights briefly before shutting off, a cracked hot surface igniter or oxidized flame sensor is the likely culprit. Call (801) 803-1689 for fast Saratoga Springs service.

What Igniter & Flame Sensor Involves

Modern gas furnaces rely on a silicon nitride or silicon carbide hot surface igniter to light the burners, and a stainless-steel flame sensor rod to verify combustion. Carbon and silica buildup on the sensor causes immediate safety shutoffs.

Common Warning Signs

  • Furnace attempts to start 3 times then enters a 1-to-3-hour soft lockout
  • Draft inducer runs, but no orange glow appears near the burners
  • Burners ignite for 3 to 5 seconds and immediately shut off
  • Control board flashes an ignition failure or flame-loss error code

Diagnostic & Referral Process

An independent technician measures igniter ohm resistance, inspects for hairline cracks, and tests flame rectification current in microamps before cleaning or replacing the component.

Cost Factors in Saratoga Springs

Flame sensor service and igniter replacements are among the most affordable furnace repairs. Use our cost calculator for typical ranges.

Compare symptoms in our igniter vs. flame sensor guide, explore gas furnace repair, and see coverage in Wander and Legacy Farms. Return to home.

Need Igniter & Flame Sensor Today?

Call our Saratoga Springs dispatch line to reach an independent local technician.

Call (801) 803-1689

Igniter & Flame Sensor FAQs

Call (801) 803-1689 — Saratoga Springs Dispatch